Victron Energy Smart Battery Management System BMS CL 12-100
- Low stock - 2 items left
- Inventory on the way
Part Number: BMS110022000
The Smart BMS CL 12/100 is a Battery Management system for Victron lithium-iron-phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator.
The BMS CL 12/100 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources or DC loads in case of low battery voltage, high battery voltage or over temperature.
The dedicated alternator input provides current limiting and one-way traffic from the alternator into the battery, this so any size alternator (and start battery) can be safely connected to the Smart Lithium battery or batteries.
The BMS is also equipped with a remote on/off connector, to turn the BMS (and the system) off via a remote switch, and a pre-alarm contact, to give a warning signal before the BMS will disconnect the batteries from the system.
Smart Battery Management System for Victron batteries only
- For use with up to five batteries in parallel
- 12V systems only
- Battery Management System with load disconnect and pre-alarm function
- Smart BMS with Charge Current Limiter that protects the alternator against overload
- Starter battery protection - only charges the lithium battery when the start batter is above 13 volts
- Remote on/off
- LED Indicators
- Built-in Bluetooth (see screenshots on the additional information tab)