Nomadic Cooling 2000 48V

48V Battery Powered Rooftop Mounted Air Conditioner

WE ARE DOING A LIMITED RUN OF THESE AS THEY ARE A PROTOTYPE

TECH SPECS

• Voltage: 48V  (Max power consumption tested over 100 Fahrenheit)

• 35 Amp Compressor 

• Power Usage: 48V 3 / 35A

•  Fan Mode

• 3A-5A

• Eco Mode

• 3A-14A @ 85 Fahrenheit

• Powerful Mode 

• 30A Max Cool @ 85 Fahrenheit

• 35A Max Cool @ 120 Fahrenheit

• Cooling Capacity: 12,480 BTU

• Net Weight: 27.69 kg 61.05 lbs

• Size: 37.75"x31"x7" (Please see here for full dimensions)

• Opening Size: 14"x14" 

• Noise Volume: 60dBa

• Refrigerant: R-134a @ 600g *gas is pre-filled before delivery. 

• Wind Volume: Max wind  volume  1050 ft  6  speed

• Battery Powered: 100%  stand-alone  Battery-powered  unit

• Battery not included

• Easy Installation: Easily fits any new or existing  14"x14"  rooftop opening.  

• See the support page for installation instructions

• Interior Vent: Use a Nomadic Cooling Vent or  Design/incorporate your own.

*Display represented in  Celsius or Fahrenheit, but must be programmed at the time of purchase.

*Mounting bolts located inside 14"x14" opening. 

• The 2000 battery-powered air-conditioner is specifically designed for individuals who travel off the grid.

• All Nomadic Cooling air-conditioners are powered by DC 12V/24V/48V batteries. Preferably lithium but not mandatory.

• This is a stand-alone air-conditioner. You do not need to connect to the engine to operate the air-conditioner. 

• All Nomadic Cooling air-conditioners are non-polluting, and highly efficient units.

• All Nomadic Cooling battery-powered air-conditioners operate at or below  60dBA. Plus, the added benefit of the vibration-free operation.

• An intelligent microprocessor control system, allows the user to set the temperature based on the desired temperature.

• Includes multiple built-in protection functions such as pressure alarm, power high/low voltage, motor over-current, and motor temperature protection.

PACKAGE INCLUDES

• 1: 48V Air Conditioning  Unit

• 1: Interior  Control  Panel  -  Thermostat Included

• 1:  Remote

• 4: Metal Washers Large

• 4: Metal Lock Washers

• 4: Mounting Bolts Large

• 4: Mounting Nuts

• 600g R134A Refrigerant (pre-filled)

• 1: 14"x14" Waterproof Gasket

• 1: Interior mounting brace 14"x14" (Metal Powder coat)

• 1: Flush mount interior vent aluminum (aluminum or powder coated)

• 8: Small black finish screws for interior vent placement

• 1: Air separator foam

NOT INCLUDED

• Fuse Breakers (Please use Blue Sea 187 Breakers 60A)

• Batteries

• Pro flex Rv Sealant

ECO MODE VS POWERFUL MODE

Eco Mode should be the default operation type on a Nomadic Cooling air conditioner.  Powerful mode should only be used for short periods of time for maximum cooling, as powerful mode has increased consumption of energy.

REMOTE FUNCTIONS

• On/Off: Turns the air conditioner on/off

• Light: Not Applicable

• Sleep: Turns off the LCD screen display light

• Cool: Not Applicable

• Dry: Not Applicable

• Fan: Each press will increase fan speed

• Powerful: A/C setting that will cool faster but will drain the battery very quickly

• Eco: Default A/C setting that uses minimal energy

• -/+: Changes the temperature

We also offer complete electrical kits customized to your rig!

User Guide 

Warranty